What is the default IP address for WatchGuard Firebox T85-PoE?

The factory default IP address for WatchGuard Firebox T85-PoE is http://10.0.1.1.

What is the default username and password for WatchGuard Firebox T85-PoE?

The default username is "admin" and the default password is "readwrite".

How do I factory reset the WatchGuard Firebox T85-PoE?

Locate the small Reset pinhole on the back panel of the WatchGuard Firebox T85-PoE. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

WatchGuard SMB Router N/A (Wired Gateway) Multi-Gigabit Enterprise Branch UTM Gateway

WatchGuard Firebox T85-PoE

Enterprise branches with VoIP phones and PoE access points needing full Total Security Suite

Open http://10.0.1.1 ↗

Illustration, not a product photo

Gateway IP

10.0.1.1

Factory Username

admin

Factory Password

readwrite

Technical specifications

Firebox T-Series

Manufacturer	WatchGuard
Product Series	Firebox T-Series
Device Class / Category	SMB Router
Wireless Standard	N/A (Wired Gateway)
Speed Rating	Multi-Gigabit Enterprise Branch UTM Gateway
Ethernet & Fiber Ports	2x 1G SFP, 8x 1G RJ45 (2x PoE+ ports), 2x USB 3.0
Routing / Firewall Throughput	4.96 Gbps Firewall / 940 Mbps Full UTM
Default Gateway URL	http://10.0.1.1 ↗
Operating System / Firmware	Fireware OS v12.10

How to log in to your WatchGuard Firebox T85-PoE

1 Connect Your Device: Plug your PC into any LAN port on the WatchGuard Firebox T85-PoE using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://10.0.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "readwrite", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related WatchGuard models

Firebox T45

SMB Router 10.0.1.1

Firebox T25 (Tabletop Security Appliance for Small Office)

SMB Router 10.0.1.1

Firebox T85 (Multi-Gigabit Tabletop Enterprise Appliance)

SMB Router 10.0.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for WatchGuard Firebox T85-PoE?

The default IP address is http://10.0.1.1, default username is "admin", and default password is "readwrite".

What ports and speeds does WatchGuard Firebox T85-PoE support?

The WatchGuard Firebox T85-PoE is equipped with 2x 1G SFP, 8x 1G RJ45 (2x PoE+ ports), 2x USB 3.0 with an overall speed rating of Multi-Gigabit Enterprise Branch UTM Gateway.

How do I reset my WatchGuard Firebox T85-PoE to factory settings?

Press and hold the physical Reset button on the WatchGuard Firebox T85-PoE for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.