RouterSync.com
Altai Technologies logo
Verified Manufacturer Hub

Altai Technologies Router Login & Default Passwords

Default credentials, IP addresses, and setup steps for Altai Technologies Super WiFi extreme long-range commercial outdoor base stations and bridge routers.

Username admin
Password admin

Altai Technologies models

Select any model below to view technical specs, port configuration, and setup guide

2 Models Indexed
Hardware Model Username Password Actions
admin admin
admin admin

How to log in to your Altai Technologies router

  1. 1 Connect the management Ethernet port to your switch or PC through the supplied PoE injector.
  2. 2 Set your PC with static IP 192.168.1.50 and open https://192.168.1.1.
  3. 3 Enter default Username: admin and Password: admin.
  4. 4 Configure beamforming antenna patterns, virtual AP SSIDs, and Altai Care cloud controller registration.
๐Ÿ”„ How to Hard Reset Altai Technologies Router to Factory Defaults

If you forgot your customized admin password or cannot reach the web portal, locate the physical RESET pinhole button on the back of your Altai Technologies router. While powered on, press and hold the button with a paperclip for 10 to 15 seconds until the power LED begins flashing. Release the button and wait 2 minutes for the unit to reboot with factory default credentials (User: admin / Pass: admin).

๐Ÿ”— Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

Frequently asked questions

What is the default IP address for Altai Technologies routers?

Most Altai Technologies routers use 192.168.1.1 as their factory default gateway management address.

What is the factory default login password for Altai Technologies?

The standard factory username is "admin" and default password is "admin". Check your physical router label if these don't work.

How do I factory reset my Altai Technologies router if I forgot the password?

Press and hold the physical RESET pinhole button on the back of your Altai Technologies device with a paperclip for 10-15 seconds until all LED lights blink, restoring default credentials.