Verified Manufacturer Hub

Brocade Router Login & Default Passwords

Carrier Ethernet edge router, Vyatta virtual router, and NetIron enterprise core setup tutorials and default logins for Brocade.

Go to 192.168.1.1 Open

Username admin

Password password

Brocade models

Select any model below to view technical specs, port configuration, and setup guide

2 Models Indexed

Hardware Model	Username	Password	Actions
Brocade Vyatta 5400 vRouter Virtual Appliance N/A Enterprise Core	vyatta	vyatta
Brocade NetIron CER 2000 Carrier Edge Router N/A Enterprise Core	admin	password

How to log in to your Brocade router

1 Connect to the Brocade router via serial console or management Ethernet port.
2 Open an SSH session to 192.168.1.1 with Username: admin (or vyatta) and Password: password.
3 Enter enable mode and execute configure terminal to configure BGP, OSPF, and VLAN routing.
4 Write running configuration to startup-config before rebooting.

🔄 How to Hard Reset Brocade Router to Factory Defaults

If you forgot your customized admin password or cannot reach the web portal, locate the physical RESET pinhole button on the back of your Brocade router. While powered on, press and hold the button with a paperclip for 10 to 15 seconds until the power LED begins flashing. Release the button and wait 2 minutes for the unit to reboot with factory default credentials (User: admin / Pass: password).

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default IP address for Brocade routers?

Most Brocade routers use 192.168.1.1 as their factory default gateway management address.

What is the factory default login password for Brocade?

The standard factory username is "admin" and default password is "password". Check your physical router label if these don't work.

How do I factory reset my Brocade router if I forgot the password?

Press and hold the physical RESET pinhole button on the back of your Brocade device with a paperclip for 10-15 seconds until all LED lights blink, restoring default credentials.