What is the default username and password for Ceragon Ceragon FibeAir IP-20C All-Outdoor Wireless Backhaul Node?

The default username is "admin" and the default password is "adminpassword".

Ceragon Enterprise Core N/A (Point-to-Point Wireless) Multi-Carrier 1 Gbps Backhaul

Ceragon Ceragon FibeAir IP-20C All-Outdoor Wireless Backhaul Node

Q: What is the default IP address for Ceragon Ceragon FibeAir IP-20C All-Outdoor Wireless Backhaul Node?

The factory default IP address for Ceragon Ceragon FibeAir IP-20C All-Outdoor Wireless Backhaul Node is http://192.168.1.1.

Q: How do I factory reset the Ceragon Ceragon FibeAir IP-20C All-Outdoor Wireless Backhaul Node?

Locate the small Reset pinhole on the back panel of the Ceragon Ceragon FibeAir IP-20C All-Outdoor Wireless Backhaul Node. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Mission-critical 4G/5G mobile backhaul and enterprise campus wireless interconnects

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

adminpassword

Technical specifications

FibeAir Series

Manufacturer	Ceragon
Product Series	FibeAir Series
Device Class / Category	Enterprise Core
Wireless Standard	N/A (Point-to-Point Wireless)
Speed Rating	Multi-Carrier 1 Gbps Backhaul
Ethernet & Fiber Ports	2x 10GbE SFP+, 2x GbE PoE RJ45
Routing / Firewall Throughput	1000 Mbps Aggregated
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Ceragon CeraOS

How to log in to your Ceragon Ceragon FibeAir IP-20C All-Outdoor Wireless Backhaul Node

1 Connect Your Device: Plug your PC into any LAN port on the Ceragon Ceragon FibeAir IP-20C All-Outdoor Wireless Backhaul Node using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "adminpassword", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Ceragon models

Ceragon FibeAir IP-20S Compact High-Capacity Wireless Edge Node

Enterprise Core 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Ceragon Ceragon FibeAir IP-20C All-Outdoor Wireless Backhaul Node?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "adminpassword".

What ports and speeds does Ceragon Ceragon FibeAir IP-20C All-Outdoor Wireless Backhaul Node support?

The Ceragon Ceragon FibeAir IP-20C All-Outdoor Wireless Backhaul Node is equipped with 2x 10GbE SFP+, 2x GbE PoE RJ45 with an overall speed rating of Multi-Carrier 1 Gbps Backhaul.

How do I reset my Ceragon Ceragon FibeAir IP-20C All-Outdoor Wireless Backhaul Node to factory settings?

Press and hold the physical Reset button on the Ceragon Ceragon FibeAir IP-20C All-Outdoor Wireless Backhaul Node for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.