What is the default username and password for Ceragon Networks Ceragon FibeAir IP-20S Compact High-Capacity Wireless Edge Node?

The default username is "admin" and the default password is "adminpassword".

Ceragon Networks Enterprise Core N/A (Point-to-Point Wireless) Compact Carrier Backhaul Gateway

Ceragon Networks Ceragon FibeAir IP-20S Compact High-Capacity Wireless Edge Node

Q: What is the default IP address for Ceragon Networks Ceragon FibeAir IP-20S Compact High-Capacity Wireless Edge Node?

The factory default IP address for Ceragon Networks Ceragon FibeAir IP-20S Compact High-Capacity Wireless Edge Node is http://192.168.1.1.

Q: How do I factory reset the Ceragon Networks Ceragon FibeAir IP-20S Compact High-Capacity Wireless Edge Node?

Locate the small Reset pinhole on the back panel of the Ceragon Networks Ceragon FibeAir IP-20S Compact High-Capacity Wireless Edge Node. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

4G/5G mobile edge cell sites, smart utility networks, and municipal broadband backhaul

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

adminpassword

Technical specifications

FibeAir Series

Manufacturer	Ceragon Networks
Product Series	FibeAir Series
Device Class / Category	Enterprise Core
Wireless Standard	N/A (Point-to-Point Wireless)
Speed Rating	Compact Carrier Backhaul Gateway
Ethernet & Fiber Ports	1x GbE SFP, 1x GbE RJ45 PoE In
Routing / Firewall Throughput	500 Mbps Full Duplex
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Ceragon CeraOS

How to log in to your Ceragon Networks Ceragon FibeAir IP-20S Compact High-Capacity Wireless Edge Node

1 Connect Your Device: Plug your PC into any LAN port on the Ceragon Networks Ceragon FibeAir IP-20S Compact High-Capacity Wireless Edge Node using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "adminpassword", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Ceragon Networks models

Ceragon FibeAir IP-20C All-Outdoor Wireless Backhaul Node

Enterprise Core 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Ceragon Networks Ceragon FibeAir IP-20S Compact High-Capacity Wireless Edge Node?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "adminpassword".

What ports and speeds does Ceragon Networks Ceragon FibeAir IP-20S Compact High-Capacity Wireless Edge Node support?

The Ceragon Networks Ceragon FibeAir IP-20S Compact High-Capacity Wireless Edge Node is equipped with 1x GbE SFP, 1x GbE RJ45 PoE In with an overall speed rating of Compact Carrier Backhaul Gateway.

How do I reset my Ceragon Networks Ceragon FibeAir IP-20S Compact High-Capacity Wireless Edge Node to factory settings?

Press and hold the physical Reset button on the Ceragon Networks Ceragon FibeAir IP-20S Compact High-Capacity Wireless Edge Node for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.