What is the default IP address for DD-WRT DD-WRT Firmware Netgear Nighthawk R7000 Gateway?

The factory default IP address for DD-WRT DD-WRT Firmware Netgear Nighthawk R7000 Gateway is http://192.168.1.1.

What is the default username and password for DD-WRT DD-WRT Firmware Netgear Nighthawk R7000 Gateway?

The default username is "root" and the default password is "admin".

How do I factory reset the DD-WRT DD-WRT Firmware Netgear Nighthawk R7000 Gateway?

Locate the small Reset pinhole on the back panel of the DD-WRT DD-WRT Firmware Netgear Nighthawk R7000 Gateway. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

DD-WRT Prosumer Gateway Wi-Fi 5 (802.11ac)

DD-WRT DD-WRT Firmware Netgear Nighthawk R7000 Gateway

Power-user open firmware upgrading, commercial OpenVPN routing, and granular Wi-Fi transmission control.

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

root

Factory Password

admin

Technical specifications

DD-WRT Hardware

Manufacturer	DD-WRT
Product Series	DD-WRT Series
Device Class / Category	Prosumer Gateway
Wireless Standard	Wi-Fi 5 (802.11ac)
Speed Rating	Gigabit Class
Ethernet & Fiber Ports	1x GbE WAN, 4x GbE LAN, 1x USB 3.0, 1x USB 2.0
Routing / Firewall Throughput	1900 Mbps
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	DD-WRT Firmware

How to log in to your DD-WRT DD-WRT Firmware Netgear Nighthawk R7000 Gateway

1 Connect Your Device: Plug your PC into any LAN port on the DD-WRT DD-WRT Firmware Netgear Nighthawk R7000 Gateway using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "root" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related DD-WRT models

DD-WRT Linksys WRT54GL Classic Flashed Router

Home Wi-Fi 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for DD-WRT DD-WRT Firmware Netgear Nighthawk R7000 Gateway?

The default IP address is http://192.168.1.1, default username is "root", and default password is "admin".

What ports and speeds does DD-WRT DD-WRT Firmware Netgear Nighthawk R7000 Gateway support?

The DD-WRT DD-WRT Firmware Netgear Nighthawk R7000 Gateway is equipped with 1x GbE WAN, 4x GbE LAN, 1x USB 3.0, 1x USB 2.0 with an overall speed rating of Gigabit Class.

How do I reset my DD-WRT DD-WRT Firmware Netgear Nighthawk R7000 Gateway to factory settings?

Press and hold the physical Reset button on the DD-WRT DD-WRT Firmware Netgear Nighthawk R7000 Gateway for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.