Verified Manufacturer Hub
FriendlyElec Router Login & Default Passwords
Default login credentials, IP addresses, and setup guides for FriendlyElec NanoPi open-source ARM soft routers running OpenWrt and FriendlyWrt.
Username
root Password
password FriendlyElec models
Select any model below to view technical specs, port configuration, and setup guide
| Hardware Model | Username | Password | Actions |
|---|---|---|---|
| root | password | ||
| root | password | ||
| root | password |
How to log in to your FriendlyElec router
- 1 Connect an Ethernet cable from your computer to the LAN port of the NanoPi router.
- 2 Open your web browser and navigate to http://192.168.2.1 or http://friendlywrt/.
- 3 Log in using Username: root and Password: password (or leave blank if prompted on vanilla OpenWrt builds).
- 4 Navigate to Network -> Interfaces to set up your WAN PPPoE/DHCP and configure firewall zones.
🔄 How to Hard Reset FriendlyElec Router to Factory Defaults
If you forgot your customized admin password or cannot reach the web portal, locate the physical RESET pinhole button on the back of your FriendlyElec router. While powered on, press and hold the button with a paperclip for 10 to 15 seconds until the power LED begins flashing. Release the button and wait 2 minutes for the unit to reboot with factory default credentials (User: root / Pass: password).
