RouterSync.com
Verified Manufacturer Hub

Kyivstar CPE Router Login & Default Passwords

Default login credentials, management portal IP, and technical setup guide for Kyivstar CPE (Ukraine) isp cpe network devices. Ukrainian ISP branded router.

Username admin
Password Printed on router base

Kyivstar CPE models

Select any model below to view technical specs, port configuration, and setup guide

2 Models Indexed
Hardware Model Username Password Actions
admin Printed on router base
admin Printed on router base

How to log in to your Kyivstar CPE router

  1. 1 Connect your computer to the Kyivstar CPE LAN port via Ethernet cable or wireless SSID.
  2. 2 Open your web browser and navigate to http://192.168.1.1 (or https://192.168.1.1).
  3. 3 Enter the default Username: admin and Password: Printed on router base.
  4. 4 Configure your network parameters, WAN connection, and administrative security settings.
๐Ÿ”„ How to Hard Reset Kyivstar CPE Router to Factory Defaults

If you forgot your customized admin password or cannot reach the web portal, locate the physical RESET pinhole button on the back of your Kyivstar CPE router. While powered on, press and hold the button with a paperclip for 10 to 15 seconds until the power LED begins flashing. Release the button and wait 2 minutes for the unit to reboot with factory default credentials (User: admin / Pass: Printed on router base).

๐Ÿ”— Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

Frequently asked questions

What is the default IP address for Kyivstar CPE routers?

Most Kyivstar CPE routers use 192.168.1.1 as their factory default gateway management address.

What is the factory default login password for Kyivstar CPE?

The standard factory username is "admin" and default password is "Printed on router base". Check your physical router label if these don't work.

How do I factory reset my Kyivstar CPE router if I forgot the password?

Press and hold the physical RESET pinhole button on the back of your Kyivstar CPE device with a paperclip for 10-15 seconds until all LED lights blink, restoring default credentials.