RouterSync.com
MitraStar logo
Verified Manufacturer Hub

MitraStar Router Login & Default Passwords

Default logins and setup instructions for MitraStar GPT and HGW series FTTH optical routers.

Username admin / 1234
Password 1234 / Printed on sticker

MitraStar models

Select any model below to view technical specs, port configuration, and setup guide

3 Models Indexed
Hardware Model Username Password Actions
192.168.1.1 (Web Access) Printed on sticker under device
admin Printed on Gateway Label
admin Printed on Gateway Base

How to log in to your MitraStar router

  1. 1 Connect to MitraStar ONT Wi-Fi.
  2. 2 Open http://192.168.1.1 in browser.
  3. 3 Enter credentials printed on the base barcode label.
๐Ÿ”„ How to Hard Reset MitraStar Router to Factory Defaults

If you forgot your customized admin password or cannot reach the web portal, locate the physical RESET pinhole button on the back of your MitraStar router. While powered on, press and hold the button with a paperclip for 10 to 15 seconds until the power LED begins flashing. Release the button and wait 2 minutes for the unit to reboot with factory default credentials (User: admin / 1234 / Pass: 1234 / Printed on sticker).

๐Ÿ”— Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

Frequently asked questions

What is the default IP address for MitraStar routers?

Most MitraStar routers use 192.168.1.1 as their factory default gateway management address.

What is the factory default login password for MitraStar?

The standard factory username is "admin / 1234" and default password is "1234 / Printed on sticker". Check your physical router label if these don't work.

How do I factory reset my MitraStar router if I forgot the password?

Press and hold the physical RESET pinhole button on the back of your MitraStar device with a paperclip for 10-15 seconds until all LED lights blink, restoring default credentials.