What is the default IP address for Pace Pace 5268AC (AT&T U-verse Gateway)?

The factory default IP address for Pace Pace 5268AC (AT&T U-verse Gateway) is http://192.168.1.254.

What is the default username and password for Pace Pace 5268AC (AT&T U-verse Gateway)?

The default username is "admin" and the default password is "Device Access Code on label".

How do I factory reset the Pace Pace 5268AC (AT&T U-verse Gateway)?

Locate the small Reset pinhole on the back panel of the Pace Pace 5268AC (AT&T U-verse Gateway). Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Pace Modem Gateway Wi-Fi 5 (802.11ac) AC1900 4x4 Dual-Band VDSL2 & Fiber Gateway

Pace Pace 5268AC (AT&T U-verse Gateway)

AT&T U-verse bonded VDSL2 and gigabit fiber residential voice and video gateway

Open http://192.168.1.254 ↗

Illustration, not a product photo

Gateway IP

192.168.1.254

Factory Username

admin

Factory Password

Device Access Code on label

Technical specifications

5000 Series

Manufacturer	Pace
Product Series	5000 Series
Device Class / Category	Modem Gateway
Wireless Standard	Wi-Fi 5 (802.11ac)
Speed Rating	AC1900 4x4 Dual-Band VDSL2 & Fiber Gateway
Ethernet & Fiber Ports	1x RJ11 Bonded DSL, 1x 1G WAN (ONT), 4x 1G LAN, 1x Coax HPNA, 2x FXS Phone Lines, 1x USB
Routing / Firewall Throughput	940 Mbps Line Rate
Default Gateway URL	http://192.168.1.254 ↗
Operating System / Firmware	Pace U-verse OS

How to log in to your Pace Pace 5268AC (AT&T U-verse Gateway)

1 Connect Your Device: Plug your PC into any LAN port on the Pace Pace 5268AC (AT&T U-verse Gateway) using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.254 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "Device Access Code on label", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Pace models

5012NV (VDSL2 Wireless N Gateway with VoIP)

Modem Gateway 192.168.1.254

5168NV (Bonded VDSL2 Wireless N Dual-Band Gateway)

Modem Gateway 192.168.1.254

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Pace Pace 5268AC (AT&T U-verse Gateway)?

The default IP address is http://192.168.1.254, default username is "admin", and default password is "Device Access Code on label".

What ports and speeds does Pace Pace 5268AC (AT&T U-verse Gateway) support?

The Pace Pace 5268AC (AT&T U-verse Gateway) is equipped with 1x RJ11 Bonded DSL, 1x 1G WAN (ONT), 4x 1G LAN, 1x Coax HPNA, 2x FXS Phone Lines, 1x USB with an overall speed rating of AC1900 4x4 Dual-Band VDSL2 & Fiber Gateway.

How do I reset my Pace Pace 5268AC (AT&T U-verse Gateway) to factory settings?

Press and hold the physical Reset button on the Pace Pace 5268AC (AT&T U-verse Gateway) for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.