Verified Manufacturer Hub
Pace Router Login & Default Passwords
Default passwords and DMZplus configuration for Pace 5268AC and AT&T U-verse residential gateways.
Username
admin Password Access Code printed on label
Pace models
Select any model below to view technical specs, port configuration, and setup guide
| Hardware Model | Username | Password | Actions |
|---|---|---|---|
| admin | Device Access Code on label | ||
| admin | admin | ||
| admin | admin |
How to log in to your Pace router
- 1 Connect your PC to the Pace gateway via Ethernet or Wi-Fi.
- 2 Open http://192.168.1.254 in your web browser.
- 3 When prompted, enter the Device Access Code found on the gateway rear sticker.
- 4 Configure DMZplus IP passthrough if using an external router.
🔄 How to Hard Reset Pace Router to Factory Defaults
If you forgot your customized admin password or cannot reach the web portal, locate the physical RESET pinhole button on the back of your Pace router. While powered on, press and hold the button with a paperclip for 10 to 15 seconds until the power LED begins flashing. Release the button and wait 2 minutes for the unit to reboot with factory default credentials (User: admin / Pass: Access Code printed on label).
