What is the default IP address for Starlink Starlink Gen 3 Wi-Fi 6 Router (UTR-231)?

The factory default IP address for Starlink Starlink Gen 3 Wi-Fi 6 Router (UTR-231) is http://192.168.1.1.

What is the default username and password for Starlink Starlink Gen 3 Wi-Fi 6 Router (UTR-231)?

The default username is "Starlink App" and the default password is "Set via Starlink App".

How do I factory reset the Starlink Starlink Gen 3 Wi-Fi 6 Router (UTR-231)?

Locate the small Reset pinhole on the back panel of the Starlink Starlink Gen 3 Wi-Fi 6 Router (UTR-231). Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Starlink Home Wi-Fi Wi-Fi 6 (802.11ax) AX3200 Tri-Band Satellite Router

Starlink Starlink Gen 3 Wi-Fi 6 Router (UTR-231)

High-speed low-earth orbit satellite internet with dual built-in Gigabit Ethernet ports

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

Starlink App

Factory Password

Set via Starlink App

Technical specifications

Starlink Gen 3

Manufacturer	Starlink
Product Series	Starlink Gen 3
Device Class / Category	Home Wi-Fi
Wireless Standard	Wi-Fi 6 (802.11ax)
Speed Rating	AX3200 Tri-Band Satellite Router
Ethernet & Fiber Ports	2x 1G Gigabit RJ45 Ethernet LAN Ports, 1x Starlink Dishy Cable Port
Routing / Firewall Throughput	1 Gbps Line Rate
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Starlink Router OS

How to log in to your Starlink Starlink Gen 3 Wi-Fi 6 Router (UTR-231)

1 Connect Your Device: Plug your PC into any LAN port on the Starlink Starlink Gen 3 Wi-Fi 6 Router (UTR-231) using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "Starlink App" and password "Set via Starlink App", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Starlink models

Starlink Gen 2 Mesh Router (UTR-211)

Home Wi-Fi 192.168.1.1

Starlink Standard Router (Gen 3)

Home Wi-Fi 192.168.1.1

Starlink Gen 1 (Original Round Dish Terminal Router UTR-201)

Home Wi-Fi 192.168.1.1

Starlink High Performance Enterprise Satellite Terminal Gateway

Enterprise Core 192.168.100.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Starlink Starlink Gen 3 Wi-Fi 6 Router (UTR-231)?

The default IP address is http://192.168.1.1, default username is "Starlink App", and default password is "Set via Starlink App".

What ports and speeds does Starlink Starlink Gen 3 Wi-Fi 6 Router (UTR-231) support?

The Starlink Starlink Gen 3 Wi-Fi 6 Router (UTR-231) is equipped with 2x 1G Gigabit RJ45 Ethernet LAN Ports, 1x Starlink Dishy Cable Port with an overall speed rating of AX3200 Tri-Band Satellite Router.

How do I reset my Starlink Starlink Gen 3 Wi-Fi 6 Router (UTR-231) to factory settings?

Press and hold the physical Reset button on the Starlink Starlink Gen 3 Wi-Fi 6 Router (UTR-231) for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.