What is the default IP address for Starlink Starlink Standard Router (Gen 3)?

The factory default IP address for Starlink Starlink Standard Router (Gen 3) is http://192.168.1.1.

What is the default username and password for Starlink Starlink Standard Router (Gen 3)?

The default username is "Starlink App" and the default password is "Configured during onboarding".

How do I factory reset the Starlink Starlink Standard Router (Gen 3)?

Locate the small Reset pinhole on the back panel of the Starlink Starlink Standard Router (Gen 3). Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Starlink Home Wi-Fi Wi-Fi 6 (802.11ax) AX3600 Tri-Band Wi-Fi 6

Starlink Starlink Standard Router (Gen 3)

Residential satellite broadband, rural high-speed connectivity, native Ethernet connectivity

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

Starlink App

Factory Password

Configured during onboarding

Technical specifications

Standard Satellite Series

Manufacturer	Starlink
Product Series	Standard Satellite Series
Device Class / Category	Home Wi-Fi
Wireless Standard	Wi-Fi 6 (802.11ax)
Speed Rating	AX3600 Tri-Band Wi-Fi 6
Ethernet & Fiber Ports	2x 1G RJ45 Ethernet LAN Ports, 1x Starlink Dish Port
Routing / Firewall Throughput	Gigabit Wire-Speed Switching
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Starlink OS

How to log in to your Starlink Starlink Standard Router (Gen 3)

1 Connect Your Device: Plug your PC into any LAN port on the Starlink Starlink Standard Router (Gen 3) using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "Starlink App" and password "Configured during onboarding", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Starlink models

Starlink Gen 3 Wi-Fi 6 Router (UTR-231)

Home Wi-Fi 192.168.1.1

Starlink Gen 2 Mesh Router (UTR-211)

Home Wi-Fi 192.168.1.1

Starlink Gen 1 (Original Round Dish Terminal Router UTR-201)

Home Wi-Fi 192.168.1.1

Starlink High Performance Enterprise Satellite Terminal Gateway

Enterprise Core 192.168.100.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Starlink Starlink Standard Router (Gen 3)?

The default IP address is http://192.168.1.1, default username is "Starlink App", and default password is "Configured during onboarding".

What ports and speeds does Starlink Starlink Standard Router (Gen 3) support?

The Starlink Starlink Standard Router (Gen 3) is equipped with 2x 1G RJ45 Ethernet LAN Ports, 1x Starlink Dish Port with an overall speed rating of AX3600 Tri-Band Wi-Fi 6.

How do I reset my Starlink Starlink Standard Router (Gen 3) to factory settings?

Press and hold the physical Reset button on the Starlink Starlink Standard Router (Gen 3) for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.