What is the default username and password for Tellabs Tellabs 120W Enterprise Optical Network Terminal (ONT)?

The default username is "admin" and the default password is "admin".

Tellabs FTTH ONT Wi-Fi 5 (802.11ac) GPON Optical LAN Enterprise Gateway

Tellabs Tellabs 120W Enterprise Optical Network Terminal (ONT)

Q: What is the default IP address for Tellabs Tellabs 120W Enterprise Optical Network Terminal (ONT)?

The factory default IP address for Tellabs Tellabs 120W Enterprise Optical Network Terminal (ONT) is http://192.168.1.1.

Q: How do I factory reset the Tellabs Tellabs 120W Enterprise Optical Network Terminal (ONT)?

Locate the small Reset pinhole on the back panel of the Tellabs Tellabs 120W Enterprise Optical Network Terminal (ONT). Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Enterprise campuses, luxury hotels, government facilities, and healthcare hospitals

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

admin

Technical specifications

Tellabs 1000 Series

Manufacturer	Tellabs
Product Series	Tellabs 1000 Series
Device Class / Category	FTTH ONT
Wireless Standard	Wi-Fi 5 (802.11ac)
Speed Rating	GPON Optical LAN Enterprise Gateway
Ethernet & Fiber Ports	1x SC/APC GPON Optical Port, 4x GbE LAN (PoE+), 2x POTS VoIP Ports
Routing / Firewall Throughput	2.488 Gbps Downstream / 1.244 Gbps Upstream GPON
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Tellabs Panorama POL OS

How to log in to your Tellabs Tellabs 120W Enterprise Optical Network Terminal (ONT)

1 Connect Your Device: Plug your PC into any LAN port on the Tellabs Tellabs 120W Enterprise Optical Network Terminal (ONT) using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Tellabs models

Tellabs 140W Tri-Mode Optical LAN Multi-Service Gateway

FTTH ONT 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Tellabs Tellabs 120W Enterprise Optical Network Terminal (ONT)?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "admin".

What ports and speeds does Tellabs Tellabs 120W Enterprise Optical Network Terminal (ONT) support?

The Tellabs Tellabs 120W Enterprise Optical Network Terminal (ONT) is equipped with 1x SC/APC GPON Optical Port, 4x GbE LAN (PoE+), 2x POTS VoIP Ports with an overall speed rating of GPON Optical LAN Enterprise Gateway.

How do I reset my Tellabs Tellabs 120W Enterprise Optical Network Terminal (ONT) to factory settings?

Press and hold the physical Reset button on the Tellabs Tellabs 120W Enterprise Optical Network Terminal (ONT) for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.