What is the default username and password for Tellabs Tellabs 140W Tri-Mode Optical LAN Multi-Service Gateway?

The default username is "admin" and the default password is "admin".

Tellabs FTTH ONT Wi-Fi 5 (802.11ac) AC1200 GPON Optical Multi-Service Gateway

Tellabs Tellabs 140W Tri-Mode Optical LAN Multi-Service Gateway

Q: What is the default IP address for Tellabs Tellabs 140W Tri-Mode Optical LAN Multi-Service Gateway?

The factory default IP address for Tellabs Tellabs 140W Tri-Mode Optical LAN Multi-Service Gateway is http://192.168.1.1.

Q: How do I factory reset the Tellabs Tellabs 140W Tri-Mode Optical LAN Multi-Service Gateway?

Locate the small Reset pinhole on the back panel of the Tellabs Tellabs 140W Tri-Mode Optical LAN Multi-Service Gateway. Press and hold it with a paperclip for 10-15 seconds while powered on until the LED lights cycle.

Hospitality suites, university student dormitories, and multi-tenant commercial suites

Open http://192.168.1.1 ↗

Illustration, not a product photo

Gateway IP

192.168.1.1

Factory Username

admin

Factory Password

admin

Technical specifications

Tellabs 1000 Series

Manufacturer	Tellabs
Product Series	Tellabs 1000 Series
Device Class / Category	FTTH ONT
Wireless Standard	Wi-Fi 5 (802.11ac)
Speed Rating	AC1200 GPON Optical Multi-Service Gateway
Ethernet & Fiber Ports	1x SC/APC GPON, 4x GbE LAN, 2x POTS, 1x RF Video Coax, 1x USB 2.0
Routing / Firewall Throughput	2.5 Gbps Optical / 867 Mbps (5GHz) + 300 Mbps (2.4GHz)
Default Gateway URL	http://192.168.1.1 ↗
Operating System / Firmware	Tellabs Enterprise OS

How to log in to your Tellabs Tellabs 140W Tri-Mode Optical LAN Multi-Service Gateway

1 Connect Your Device: Plug your PC into any LAN port on the Tellabs Tellabs 140W Tri-Mode Optical LAN Multi-Service Gateway using an Ethernet cable, or connect to the default Wi-Fi SSID printed on the router label.
2 Navigate to Gateway IP: Launch your web browser and enter http://192.168.1.1 into the address bar.
3 Enter Factory Credentials: Enter username "admin" and password "admin", then click Login.
4 Configure Security & Password: Follow the on-screen Quick Setup wizard to customize your Wi-Fi SSID, set WPA3/WPA2-AES encryption, and establish a new master administrator password.

Related Tellabs models

Tellabs 120W Enterprise Optical Network Terminal (ONT)

FTTH ONT 192.168.1.1

🔗 Universal Router Directory Network

Explore Gateway IPs, Router Brands & Utilities

All Brands All IPs

Popular Gateway IP Addresses

12 of 90

192.168.1.1 Guide → 192.168.0.1 Guide → 192.168.2.1 Guide → 192.168.1.254 Guide → 10.0.0.1 Guide → 192.168.29.1 Guide → 192.168.178.1 Guide → 192.168.31.1 Guide → 192.168.8.1 Guide → 192.168.100.1 Guide → 192.168.88.1 Guide → 192.168.18.1 Guide →

View all 90 gateway IPs

Top Router Manufacturers

10 of 836

MikroTik 192.168.88.1

Browse all 836 brands

Network Tools & Databases

8 tools

🔍

MAC Address Lookup

Identify Hardware OUI

Fast & Secure Resolvers

Fiber Broadband ISPs & ONT Modems

12 of 91

JioFiber 192.168.29.1 Airtel Xstream Fiber 192.168.1.1 BSNL FTTH Bharat Fiber 192.168.1.1 ACT Fibernet 192.168.1.1 Tata Play Fiber 192.168.1.1 AT&T Fiber 192.168.1.254 Xfinity Comcast 10.0.0.1 Verizon Fios 192.168.1.1 Spectrum Internet 192.168.1.1 Virgin Media UK 192.168.0.1 BT Broadband UK 192.168.1.254 Telstra Broadband Australia 192.168.0.1

View all 91 ISP guides

Frequently asked questions

What is the default login for Tellabs Tellabs 140W Tri-Mode Optical LAN Multi-Service Gateway?

The default IP address is http://192.168.1.1, default username is "admin", and default password is "admin".

What ports and speeds does Tellabs Tellabs 140W Tri-Mode Optical LAN Multi-Service Gateway support?

The Tellabs Tellabs 140W Tri-Mode Optical LAN Multi-Service Gateway is equipped with 1x SC/APC GPON, 4x GbE LAN, 2x POTS, 1x RF Video Coax, 1x USB 2.0 with an overall speed rating of AC1200 GPON Optical Multi-Service Gateway.

How do I reset my Tellabs Tellabs 140W Tri-Mode Optical LAN Multi-Service Gateway to factory settings?

Press and hold the physical Reset button on the Tellabs Tellabs 140W Tri-Mode Optical LAN Multi-Service Gateway for 10 to 15 seconds until the power LED blinks, resetting all settings to factory default.