Verified Manufacturer Hub
Radwin Router Login & Default Passwords
Configuration instructions, IP parameters, and management procedures for Radwin carrier-grade point-to-point and point-to-multipoint wireless broadband radios.
Username
admin Password
admin Radwin models
Select any model below to view technical specs, port configuration, and setup guide
| Hardware Model | Username | Password | Actions |
|---|---|---|---|
| admin | admin | ||
| admin | admin |
How to log in to your Radwin router
- 1 Connect your management laptop to the PoE injector LAN port of the Radwin outdoor unit.
- 2 Set a static IP on your computer (such as 10.0.0.10, subnet mask 255.255.255.0).
- 3 Open your browser and navigate to https://10.0.0.1 or launch the RADWIN Manager suite.
- 4 Log in with Username: admin and Password: admin, then align the RF antenna using real-time RSSI tones.
🔄 How to Hard Reset Radwin Router to Factory Defaults
If you forgot your customized admin password or cannot reach the web portal, locate the physical RESET pinhole button on the back of your Radwin router. While powered on, press and hold the button with a paperclip for 10 to 15 seconds until the power LED begins flashing. Release the button and wait 2 minutes for the unit to reboot with factory default credentials (User: admin / Pass: admin).
